AVT MAGIC ISDN Service Manual Page 98

  • Download
  • Add to my manuals
  • Print
  • Page
    / 170
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 97
PAGE 98
MAGIC TOUCH Software
7.7.3.14 Audio Lines (Configuration of the Audio interfaces)
The Audio interfaces are configured with the Audio Lines link (configuration
of the Audio interfaces) .
FIG. 66 CONFIGURATION OF THE AUDIO INTERFACES
After pressing the OK button, all settings are accepted.
The Cancel key deletes all settings.
7.7.3.14.1 AES/EBU/ANALOGUE Module
When using digital AES/EBU outputs the clock can be defined with Clock
source of digital output, which operates this interface. The following settings
are possible:
Recovered Clock (from digital audio input)
This setting can be used if a digital source is connected to the digital input.
The digital output signal is synchronous to the digital input signal.
Internal Clock
The clock for the output of the digital output signal is generated internally.
In this case the sample rate is always 48-kHz.
External Clock
In this setting the clock that defines the frequency of the output signal
must be fed in via the BNC. The sample rate must be 48-kHz.
The corresponding word clock can be accessed as an output via the BNC con-
L
The following configuration is only possible if an AES/EBU/ANALOGUE
Module is equipped. If the module is not equipped see CHAPTER 7.7.3.14.2.
Page view 97
1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 169 170

Comments to this Manuals

No comments